Technical Specification |
SUN2000-100KTL-M1 |
|
Efficiency |
Max. efficiency |
98.8% @480 V, 98.6% @380 V / 400 V |
European efficiency |
98.6% @480 V, 98.4% @380 V / 400 V |
|
Input |
Max. Input Voltage 1 |
1,100 V |
Max. Current per MPPT |
26 A |
Max. Short Circuit Current per MPPT |
40 A |
Start Voltage |
200 V |
MPPT Operating Voltage Range 2 |
200 V ~ 1,000 V |
Nominal Input Voltage |
720 V @480 Vac, 600 V @400 Vac, 570 V @380 Vac |
Number of MPP trackers |
10 |
Max. number of inputs |
20 |
|
Output |
Nominal AC Active Power |
100,000 W |
Max. AC Apparent Power |
110,000 VA |
Max. AC Active Power (cosφ=1) |
110,000 W |
Nominal Output Voltage |
480 V/ 400 V/ 380 V, 3W+(N)+PE |
Rated AC Grid Frequency |
50 Hz / 60 Hz |
Nominal Output Current |
120.3 A @480 V, 144.4 A @400 V, 152.0 A @380 V |
Max. Output Current |
133.7 A @480 V, 160.4 A @400 V, 168.8 A @380 V |
Adjustable Power Factor Range |
0.8 leading... 0.8 lagging |
Max. Total Harmonic Distortion |
<3% |
|
Protection |
Input-side Disconnection Device |
Yes |
Anti-islanding Protection |
Yes |
AC Overcurrent Protection |
Yes |
DC Reverse-polarity Protection |
Yes |
PV-array String Fault Monitoring |
Yes |
DC Surge Arrester |
Type II |
AC Surge Arrester |
Type II |
DC Insulation Resistance Detection |
Yes |
Residual Current Monitoring Unit |
Yes |
|
Communication |
Display |
LED indicators; WLAN adaptor + FusionSolar APP |
RS485 |
Yes |
USB |
Yes |
Monitoring BUS (MBUS) |
Yes (isolation transformer required) |
*1 The maximum input voltage is the upper limit of the DC voltage. Any higher input DC voltage would probably damage inverter. *2 Any DC input voltage beyond the operating voltage range may result in inverter improper operating